View ijsrd journal's profile on LinkedIn
Showing posts with label call for paper. Show all posts
Showing posts with label call for paper. Show all posts

Tuesday, October 4, 2016

Call For Paper | IJSRD Journal | October 2016 | Vol. 4 Issue - 8 | Impact Factor : 2.39

Paper Submission open for October- 2016
  • Last Date of Submission : October 25, 2016
  • Acceptance Notification : within 4 - 6 days after submission 
  • (Faster Online Peer Review)
  • ISSN (Online) : 2321-0613
  • Frequency : Monthly, 12 issues per year
  • Publication Charges : 750 INR
  • Impact Factor : 2.39

Call For Paper | IJSRD Journal | October 2016 | Vol. 4 Issue - 8 | Impact Factor : 2.39

Monday, April 11, 2016

A Novel Technique for Realization of Circular Polarization in Planar Inverted F Antenna | IJSRD

In this paper various techniques for realization of circular polarization in Planar Inverted F Antenna for Nano satellite applications at 2.4Ghz (s-Band) is presented and several research works done on PIFA are categorized and discussed. PIFA is most commonly used and extensively demanded antenna especially in mobile communication because of its low profile, moderate gain, good radiation pattern, multiband operation.

Fig: Layout of PIFA in ADS
This  Article represents past study on planar inverted f antenna. After study of various research papers it can be concluded that with the suitable technique circular polarization can be generated in this antenna and thus can be useful in nanosatellite applications
             PIFA can be thought of as a combination of the inverted-F (IFA) and the short-circuit rectangular micro strip antennas. Quarter-wavelength Patch Antenna, which leads into the Planar Inverted-F Antenna (PIFA). It is small and has a low profile, making it suitable for mounting on portable equipment. It is a variant of monopole where the top section has been folded down so as to be parallel with ground plane. This is done to reduce the height of the antenna, while maintaining resonant training length
These are the applications of Planar Inverted F Antenna:
  1. Mobile Communication
  2. Satellite communication
  3. Direct broadcast services
An article  published in IJSRD by Jadav Ankita Bhavanbhai of Electronics and Communication Engineering from L.J.INSTITUTE OF ENGINEERING & TECHNOLOGY

For more Helpful Articles visit

To download the Full article... Click Here

Tuesday, February 9, 2016

Safer Internet Day 2016 | IJSRD

Safer Internet Day 2016 | IJSRD

Safer Internet Day gives us an opportunity to pause and reflect on this fact, but also to think about the challenges we face in our globally connected world. At the same time, it’s important to remember that these challenges are not the product of the internet. 

IJSRD Celebrate 10th Safer Internet Day and support to use Safe Internet.
IJSRD is an Open-Access peer reviewed International Journal.Exhaustive list of executive board members who were invited from all the Colleges , Universities and research organization.Research scholar can download any article from the website for free of cost.

Tuesday, December 15, 2015

Problems in Getting Ambulatory Blood Pressure Monitoring using Infrared PPG

Problems in Getting Ambulatory Blood Pressure Monitoring using Infrared PPG


Shailaja Vedpathak , K.B.P.College of engg satara; Dr.B.B.Godbole, K.B.P.College of engg satara


Infrared Light; Photoplethysmograph (PPG), Pulse Rate; Reflectance; Transmittance


In the current study, a non-invasive technique for blood pressure (BP) measurement based on the detection of Photoplethysmographic (PPG) pulses during pressure-cuff deflation was compared to sphygmomanometry—the Korotkoff sounds technique. The PPG Senor used to measure blood pressure using the technique of correlation of volume and pressure. The performance of portable and wearable biosensorsis highly influenced by motion artifact, artery stiffness, measurement sites, light wavelength, sensor pressure, A novel real time system is proposed for accurate motion-tolerant extraction of heart rate (HR) and pulse oximeter oxygen saturation (SpO2) from wearable Photoplethysmographic (PPG) biosensors. Recently, monitoring of blood pressure fluctuation in the daily life is focused on in the hypertension care area to predict the risk of cardiovascular and cerebrovascular disease events. The main problem is using with digital BP monitoring machine is Doctors are not believe on digital machines they believe with only sphygmomanometer. In this paper, in order to propose an alternative system to the existed ambulatory blood pressure monitoring (ABPM) sphygmomanometer, to sort out the problems using small wearable device consisting of photoplethysmograph (PPG) sensors. Recent advances in optical technology have facilitated the use of high-intensity green LEDs for PPG, increasing the adoption of this measurement technique. In this paper, we briefly present the problems of PPG sensor and recent developments in wearable pulse rate sensors with green LEDs.

Click here for full length article :

Sunday, November 22, 2015

Study of Effect of Climatological Variables on Crop Yeild Estimation Using Multiple Linear Regression #IJSRD

Study of Effect of Climatological Variables on Crop Yeild Estimation Using Multiple Linear Regression

Author(s):  Dr. T. M. V. Suryanarayana , WREMI, The M.S. University of Baroda

Keywords: Climatological Data, Crop Yield, Multiple Linear Regression, R.M.S.E., Coefficient of Correlation


An attempt has been made to carry out the study of determining the predominant climatological variables in estimating the crop yield. The climatological data are collected for the period 1981- 2006 and correlated with yield of cotton in Vallabh Vidyanagar using Multiple Linear Regression. The Climatological variables considered are Maximum Temperature, Minimum Temperature, Relative Humidity, Wind Speed and Sunshine Hours. The multiple linear models have been developed, to study their impact in prediction of the crop yield. The study has been carried out with eight different combinations of the five independent variables considered, to correlate with the crop yield. In each combination, i.e 1 to 8, the whole data is divided into proportions for training and Validation, such as 70% and 30% & 60% and 40% respectively. The developed Multiple Linear Regression Models are evaluated based on the performance indices such as Root Mean Squared Error and Correlation Coefficient. Based on the evaluation, the models developed are found to perform better in 60%-40% proportion of the data considered for the Study. Therefore in this considered proportion of the dataset, the models developed are ranked based on the obtained R.M.S.E. and R. The results clearly show that the consideration of all the variables, yield the best model with minimum R.M.S.E. and maximum R, followed by the combinations considering Maximum Temperature, Minimum Temperature, Relative Humidity as dependent variables along with/without Wind Speed/Sunshine hours. Moreover excluding the Relative Humidity, and trying the combinations of Maximum Temperature, Minimum Temperature along with/without Wind Speed/Sunshine Hours yields the poor models with maximum R.M.S.E. amd Minimum R. Hence considering multiple linear regression models and the eight combinations studied, it reveals that the yield of a crop is very much dependent on maximum and minimum temperatures & relative humidity.

For Full Length Paper :

Monday, November 16, 2015

Real Time Weather Monitoring System #NCIL #IJSRD

Paper Title : Real Time Weather Monitoring System

Author(s): Sarthak Kala, Maharaja Agrasen College, University of Delhi; Pranav Negi, Maharaja Agrasen College, University of Delhi

Keywords: DHT11 , BMP 180, Tipping Bucket, Reed Switch, Arduino

Abstract : Weather reflects the short term change in our atmosphere, the volatile variable in our environment. Monitoring weather trends can give us an insight into the environment around us. The aim of this paper is to build an automated real time weather monitoring system by leveraging the power of Open Source Hardware. Never has the open source community been this much connected and implementation of this technology so convenient. All data is collected by different types of sensors available locally and are controlled using a microcontroller. Meteorological parameters being considered here are: Temperature, Humidity, Barometric Pressure, Rainfall and Wind Speed. Parameters like Heat Index and Wind Chill which are derived from combinations of Temperature &Humidity and Temperature & Wind-Speed respectively can also be calculated.

Monday, September 21, 2015


All researchers working on data mining, here we found some useful challenges of Data Mining.
  • Developing a unifying theory of data mining
  • Scaling up for high dimensional data and high speed data streams
  • Mining sequence data and time series data
  • Mining complex knowledge from complex data
  • Data mining in a network setting
  • Distributed data mining and mining multi-agent data
  • Data mining for biological and environmental problems
  • Data Mining process-related problems
  • Security, privacy and data integrity
  • Dealing with non-static, unbalanced and cost-sensitive data
If you have more suggestion please add it to comment.
To know more about data mining and related topics please visit

Tuesday, July 21, 2015


A lot of us feel the same way but end up doing nothing to change it. Just because you have never done anything exceptional does not mean you don't have it in you.

Not all of us did well in school. Honestly, it doesn't matter because school is not the only education. Here are people who dropped out to do what they did and were really good at it.


Wednesday, October 15, 2014

Sliced Bread: The 'Greatest Thing' Turns 86 - IJSRD Research Lets Do IT... !!!

Sliced bread and its inventor, Otto Rohwedder, both celebrate a birthday today. Rohwedder was born on July 7, 1880, and the first sliced loaves were sold on July 7, 1928.

Research Lets DO IT.... !!! @ IJSRD
Every invention that makes life easier is now deemed "the greatest thing since sliced bread," but the idea of presliced bread actually took a while to catch on. Rohwedder spent over 10 years trying to get a bakery to try out his machine. Bakers thought that their customers simply wouldn't be impressed and wouldn’t care if their bread was presliced or not. Skeptics were also worried that the presliced bread would become stale faster or would crumble and fall apart during the slicing, according to the Constitution-Tribune.
main article click here
for more information click here

Thursday, August 7, 2014

#IJSRD Car Speed Control Using Bluetooth

In the current scenario the world is plagued by accidents which are primarily due to human errors in judgment and hence thousands of lives are lost. These accidents can be avoided if only there was a mechanism to alert the driver of approaching danger. This can be done by monitoring the distance between nearby cars and alerting the driver whenever the distance becomes too short. This is precisely the aim of this paper. In this paper we propose the use of Bluetooth Technology by which we can check the speed of the car whenever it comes dangerously close to any other vehicle up front, thereby saving very many lives.
Useful website for Engineering (Diploma,BCA,MCA,B.E/M.E/Ph.D) Students....
kindly share to all engineers...
Visit us on

Monday, July 28, 2014

#IJSRD What is SAP Testing?

The SAP (System Applications Products) testing is same as software application manual testing but here the applications are the SAP R/3 (it is an ERP system) and Enterprise portal. So, whenever you get a change in R/3 and Portal, you need to come up with test cases for the new functionality and test the changes in the application. The SAP tester needs common testing mind with SAP tools knowledge like HR, SD and CRM etc will help in understanding the system and testing the applications.
go to all the links which are shown below..

Wednesday, May 21, 2014

The most effective method to Select a Dissertation Topic #IJSRD

# IJSRD Steps

  1. Pick something that you are energetic about
  2. Pick something that you are educated in
  3. Pick a zone where a true and huge specialization-related issue exists
  4. Pick a point where there is a rich wellspring of academic examination accessible as the premise for making a  hypothetical schema/establishment for exploration
  5. Pick a point that has been mulled over long ago, yet where new experiences could be given by taking a gander at it in another way (i.e. don't be a trailblazer!)
  6. Pick a zone of research that is achievable inside the timelines assigned for your doctoral courses (i.e., don't "heat up the sea")
  7. Pick a zone where information will be accessible for accumulation
For More Research Help # IJSRD